Beta RR 400 Mode D'emploi page 143

4
SUSPENSIONS
TELESCOPIC FORK
A
ADJUSTING THE REBOUND DAMPER
The hydraulic rebound damper determines
the behaviour of the telescopic fork during
extension and can be adjusted by means
of screw A. Turning the screw clockwise
(towards the + sign) increases the action
of the rebound damper; turning it anticlock-
wise (towards the – sign) decreases the
action of the rebound damper.
Standard adjustment RR 4T:
12 clicks from the completely closed position
Standard adjustment RR 4T RACING:
20 clicks from the completely closed position
ADJUSTING THE COMPRESSION
DAMPER
The hydraulic compression damper deter-
mines the behaviour of the telescopic fork
during compression and can be adjusted
B
by means of screw B located at the lower
end of the fork legs. Turning the screw clock-
wise increases the action of the compres-
sion damper; turning it anticlockwise de-
creases the action of the compression
damper.
Standard adjustment RR 4T:
12 clicks from the completely closed position
Standard adjustment RR 4T RACING:
20 clicks from the completely closed position
NOTICE
In the RR 4t Racing models, the regula-
tors on the fork that adjust the expansion
or pressure of the brakes are the other way
round, compared to the RR 4t models.
GB
65