Water Jet" Functions - Temperature Adjustment; All Models; Electronic Activation Of The "Water Jet" Functions; Shower - Jacuzzi frame Manuel D'utilisation Et Entretien

"Water jet" functions -
temperature adjustment
TB model (Frame100-120) / mod. TOP (Frame in2)
Grasp the shower and turn the diverter knob (D) in corre-
spondence of the relative symbol (pay attention to how you hold
the shower, as water will come out as soon as the tap is opened).
mod. TT and TOP (only Frame 100-120)
Turn the diverter knob (D) in correspondence of the "water
temperature test" symbol.

All models

Open the tap (R) and turn the mixer knob (M) so that the ref-
erence mark coincides with the desired temperature (to select
temperatures above 38 °C press the release button (P).
In the TT and TOP models, the water exits from the nozzle
located under the seat, while in TB models (Frame 100-120 and
TOP Frame in2), it exits from the hand-held shower: test the tem-
perature with your foot and adjust it if necessary by turning the
mixer knob.
Turn the diverter in correspondence of the symbol relative
to the desired function (refer to the figures of the various control
panels and the chapters that describe the functions).
Electronic activation
of the "water jet" functions
If you intend to use the "waterfall" and/or the whirlpool
jets, first adjust the water temperature as indicated and then
turn the diverter (D) in correspondence of the symbol "E".
At this point, the desired function can be activated using the
control panel, adjusting the quantity of water using the tap (refer
also to the chapter related to the function).

Shower

I
deal for refreshing yourself and toning skin and muscles.
Adjust the water temperature as indicated in the "Water jet
functions - temperature adjustment" chapter.
Then turn the diverter (D) to the indicated symbol.

Showerhead

L
ocated on the roof of the unit, this strong and energetic jet helps
to wash away the day's fatigue thanks to its vigorous massage.
Adjust the water temperature as indicated in the "Water jet
functions - temperature adjustment" chapter.
Then turn the diverter (D) to the indicated symbol.
45