Table des Matières
Publicité
Control panel
Compartment select key
Icons
All modes are "OFF" by a default setting.
Main modes
Energy saving
Express Freezing
Multi temperature room assisting modes
Express cool
Defrost food
Additional settings
At the time of re-power distribution
• When there is a power failure during the operation of
express freezing or ice tray cleaning, the operation is
stopped.
• See "Multi temperature room" about the assisting mode.
• The other settings are the same as before the power
failure.
All manuals and user guides at all-guides.com
Select key
Press to select ON/OFF of each mode or temperature setting.
To light up the control panel
Press the enter key.
The control panel shows the preset temperature of each
compartment and the operating icons.
Vacation mode
by a default setting.)
Plasmacluster
Extra cool
Cool down
* The temperature is not indicated on the display while
Control panel lock
Note
• Press the keys with your bare hand to operate.
• Operation is not accepted while the door* is opened.
• When there is no operation for 1 minute, the display
• Every time you open the door*, the control panel lights
Temperature rise sign
Will indicate the rise of inside temperature
caused by power failure or some other
malfunction.
Temperature display
For indicating preset temperature or
ON/OFF of each mode.
Enter key
For entering the setting.
< Standby display >
one of assisting modes in operation.
Operation with wet hand is invalid.
automatically returns to the standby display. Thus if
there is no operation for another 1 minute, the display
up to show the current setting.
*
9
Publicité
Table des Matières
