Control Panel - Sharp SJ-WX830F Mode D'emploi

Masquer les pouces Voir aussi pour SJ-WX830F:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Control panel

Compartment select key
Icons
All modes are "OFF" by a default setting.
Main modes
Energy saving
Express Freezing
Ice making
Multi temperature room assisting modes
Express cool
Defrost food
Additional settings
Water dispenser
lock
Sound off
Motion sensor off
LED indicator off
At the time of re-power distribution
• When there is a power failure during the operation of
express freezing or ice tray cleaning, the operation is
stopped.
• See "Multi temperature room" about the assisting mode.
• The other settings are the same as before the power
failure.
Select key
Press to select ON/OFF of each mode or temperature setting.
Vacation mode
Plasmacluster
Ice tray cleaning
Extra cool
Cool down
Door alarm off
Control panel lock
Temperature rise sign
Will indicate the rise of inside temperature
caused by power failure or some other
malfunction.
(See the next page)
Temperature display
For indicating preset temperature or
ON/OFF of each mode.
Enter key
For entering the setting.
To light up the control panel
When you approach to the refrigerator, the motion sensor
reacts to it and control panel lights up automatically.
(If the control panel does not light up, press the enter
key.)
The control panel shows the preset temperature of each
compartment and the operating icons.
(All icons do not turn on because all modes are "OFF"
by a default setting.)
< Standby display >
* The temperature is not indicated on the display while
one of assisting modes in operation.
Note
• Press the keys with your bare hand to operate.
Operation with wet hand is invalid.
• Operation is not accepted while the door* is opened.
• When there is no operation for 1 minute, the display
automatically returns to the standby display. Thus if
there is no operation for another 1 minute after you step
away from the refrigerator the display turns off.
(The display does not turn off while the motion sensor is
ON.)
• Every time you open the door*, the control panel lights
up to show the current setting.
(* Only refrigerator door and left freezer door.)
EN
*
EN-7

Publicité

Table des Matières
loading

Table des Matières