Control Panel - Sharp SJ-FSD910 Mode D'emploi

Control panel

Compartment select key
Icons
All modes are "OFF" by a default setting.
Main modes
Energy saving
Express Freezing
Ice making
Multi temperature room assisting modes
Express cool
Defrost food
Additional settings
Water dispenser
lock
Sound off
Motion sensor off
LED indicator off
At the time of re-power distribution
• When there is a power failure during the operation of
express freezing or ice tray cleaning, the operation is
stopped.
• See "Multi temperature room" about the assisting mode.
• The other settings are the same as before the power
failure.
All manuals and user guides at all-guides.com
Select key
Press to select ON/OFF of each mode or temperature setting.
When you approach to the refrigerator, the motion sensor
reacts to it and control panel lights up automatically.
(If the control panel does not light up, press the enter
key.)
Vacation mode
The control panel shows the preset temperature of each
compartment and the operating icons.
Plasmacluster
(All icons do not turn on because all modes are "OFF"
by a default setting.)
Ice tray cleaning
Extra cool
Cool down
* The temperature is not indicated on the display while
Door alarm off
Control panel lock
Note
• Press the keys with your bare hand to operate.
• Operation is not accepted while the door* is opened.
• When there is no operation for 1 minute, the display
• Every time you open the door*, the control panel lights
(* Only refrigerator door and left freezer door.)
Temperature rise sign
Will indicate the rise of inside temperature
caused by power failure or some other
malfunction.
(See the next page)
Temperature display
For indicating preset temperature or
ON/OFF of each mode.
Enter key
For entering the setting.
To light up the control panel
< Standby display >
one of assisting modes in operation.
Operation with wet hand is invalid.
automatically returns to the standby display. Thus if
there is no operation for another 1 minute after you step
away from the refrigerator the display turns off.
(The display does not turn off while the motion sensor is
ON.)
up to show the current setting.
*
9