Bluetooth - Philips Fidelio Manuel D'utilisation

• If you intend the wireless portable speaker
to be a standalone Bluetooth speaker,
make sure that you connect the portable
left or right speaker to a Bluetooth device
(see 'Bluetooth on a single speaker' on
page 16 
No sound from the wireless subwoofer.
• Wirelessly connect the subwoofer to the
main unit.
Distorted sound or echo.
• If you play audio from the TV through the
SoundBar, make sure that the TV is muted.
Audio and video are not synchronized.
• Press AUDIO SYNC +/- to synchronize
the audio with the video.

Bluetooth

A device cannot connect with the SoundBar.
• The device does not support the
FRPSDWLEOH SURÀOHV UHTXLUHG IRU WKH
SoundBar.
• You have not enabled the Bluetooth
function of the device. See the user manual
of the device on how to enable the
function.
• The device is not correctly connected.
Connect the device correctly.
• The SoundBar is already connected with
another Bluetooth device. Disconnect the
connected device, then try again.
Quality of audio play from a connected
Bluetooth device is poor.
• The Bluetooth reception is poor. Move the
device closer to the SoundBar, or remove
any obstacle between the device and the
SoundBar.
The connected Bluetooth device connects and
disconnects constantly.
• The Bluetooth reception is poor. Move the
device closer to the SoundBar, or remove
any obstacle between the device and the
SoundBar.
B5_37_UM_V1.0.indb 21
• Turn off Wi-Fi function on the Bluetooth
device to avoid interference.
• For some Bluetooth, the Bluetooth
connection can be deactivated
automatically to save power. This does not
indicate any malfunction of the SoundBar.
Spatial calibration
Why spatial calibration is needed?
• Spatial calibration optimizes surround
sound experience if your portable left and
ULJKW VSHDNHUV VXUURXQG DUH QRW SURSHUO\
placed.
Improvement in surround sound is not
noticeable after successful spatial calibration.
• Surround sound improvement is only
noticeable if the portable left and right
VSHDNHUV VXUURXQG ZHUH LPSURSHUO\
placed, or if there is strong surround effect
in the music you play.
Error message is displayed on the display
panel.
• If spatial calibration fails, one of the
following error message is displayed. Refer
WR WKH IRXUWK FKDSWHU 6SDWLDO FDOLEUDWLRQ
for details to re-calibrate.
• FAIL IDLO LQGLFDWHV WKDW WKH
portable left/right speaker is not in
SURROUND ON DEMAND mode
or out of calibration range, or there is
some obstacle by which the main unit,
the portable left and right speakers
cannot completely "see" each other.
• BATT LOW EDWWHU\ ORZ LQGLFDWHV
that the portable left/right speaker has
low battery.
• ERR1 HUURU LQGLFDWHV WKDW WKH
portable left and right speakers are not
detached from the main unit.
EN 21
7/31/2015 5:22:55 PM