Connect Digital Devices Through Hdmi; Spatial Calibration; Step 1: Calibrate The Listening Zone; Step 2: Calibrate The Surround Speaker Position - Philips Fidelio Manuel D'utilisation

2
Press AUX on the remote control of
this product to enable the analog audio
connection.
Connect digital devices
through HDMI
Connect a digital device such as a set-top box,
DVD/Blu-ray player, or games console to this
product through a single HDMI connection.
When you connect the devices in this way and
SOD\ D ÀOH RU JDPH WKH
• video is automatically displayed on your
TV, and
• audio is automatically played on this
product.
1
Using a High Speed HDMI cable, connect
the HDMI OUT connector on your
digital device to the HDMI IN 1/2 on this
product.
• A High Speed HDMI cable is
recommended.
2
Connect this product to TV through HDMI
OUT (ARC).
• If the TV is not HDMI CEC compliant,
select the correct video input on your
TV.
3
On the connected device, turn on HDMI-
CEC operations.
• For HDMI-CEC issues on your TV, see
the TV user manual and ensure the
HDMI-CEC setup is correct, or contact
the TV manufacturer if needed.
4
Press HDMI 1 / HDMI 2 on the remote
control of this product to enable the
HDMI IN connection.
12 EN
B5_37_UM_V1.0.indb 12
4 Spatial
calibration
Spatial calibration is used to achieve the
following convenience, and simultaneously
optimizes surround sound experience for it.
• Have freedom to place the portable left
DQG ULJKW VSHDNHUV VXUURXQG DFFRUGLQJ WR
your need.
• Automatically balance the portable
VSHDNHUV VXUURXQG ZLWK UHVSHFW WR \RXU
seating position.
The spatial calibration involves two steps.
•

Step 1: calibrate the listening zone

• Step 2: calibrate the surround speaker
position
When to calibrate
• If you perform spatial calibration for the
ÀUVW WLPH SHUIRUP Step 1 and Step 2 in
sequence.
• If you re-design your seating layout,
perform Step 1 and Step 2 in sequence.
• If you re-locate the portable left and right
VSHDNHUV VXUURXQG  SHUIRUP Step 2
independently (Step 1 FDQ EH VNLSSHG 
Before you start
• Make sure that the room is fairly quiet.
• Place the portable left and right speakers
angled towards the main unit.
• Make sure that the main unit, the portable
left and right speakers can fully "see" each
other, no obstacle between them blocking
such view. Stand the portable speakers
upright if needed.
• The minimum distance between the
portable speakers and the main unit is
P   WKH PD[LPXP GLVWDQFH P
 
7/31/2015 5:22:55 PM