Wireless Portable Speakers - Philips Fidelio Manuel D'utilisation

• Press three times to trigger calibration
for the portable left and right speakers
position.
n DIM
Set the brightness of SoundBar display
panel.
o MOVIE
Select surround sound mode.
p TREBLE +/-
Increase or decrease treble on the main
unit.

Wireless portable speakers

The SoundBar comes with two wireless
SRUWDEOH VSHDNHUV OHIW DQG ULJKW 
a b
* The illustration above is for overview of the
portable left speaker.
a Reset key
Press with a pin to reset the portable
speaker to the default settings.
b ON
• Press to turn on the portable speaker
if it automatically goes to standby.
• Press and hold to switch the portable
speaker to standby.
c Speaker LED
• Blinks in red and orange alternatively
if the portable speaker is not wirelessly
connected to the main unit.
• Lights up white when the portable
speaker is wirelessly connected to the
main unit, or when the battery capacity
is full or more than 30% remaining.
6 EN
B5_37_UM_V1.0.indb 6
•
•
•
d SURROUND ON DEMAND button/LED
•
•
e
button/LED
•
•
c d e
•
Note
•
If you press the
the portable speaker disconnects the main unit (or
SURROUND ON DEMAND PRGH VZLWFKHV RII 
Lights up red when the battery
capacity is less than 30% remaining .
Blinks red when the battery capacity is
less than 10% remaining.
Lights up orange when the portable
speaker is being charged (only for the
portable speakers docked into the
PDLQ XQLW 
Press to switch the portable speaker
to SURROUND ON DEMAND
mode.
The LED lights up white when the
portable speaker is switched to
SURROUND ON DEMAND mode.
Press to switch the portable speaker
to Bluetooth mode.
The LED blinks when you switch the
portable speaker to Bluetooth and no
Bluetooth devices are connected.
The LED lights up when you switch
the portable speaker to Bluetooth and
Bluetooth devices are connected.
button on the portable speaker,
7/31/2015 5:22:54 PM