Panasonic WV-Q116 Instructions page 5

WV-Q116E_E.qxd 05.2.2
13. Secure the camera to the lock plate.
Securing the camera
After installing the camera, move the
lock plate in the direction of the arrow,
and secure it with a screw.
Make sure that the camera cannot
come loose after tightening the screws.
Lock
Move the upper
lock to secure
the camera
Move the lock
plate in the
direction of
the arrow
Problems
Lock
If the lock plate cannot move into the
lock position, then the camera is prob-
ably not firmly set. Make sure that the
camera is correctly installed.
11:05 Page 5
Lock
Locked
- 5 -
Uninstalling
Loosen the screw, move the lock plate
in the direction of the arrow, and then
remove the camera.
Lock
Move the lock plate in
the direction of the arrow
14. Mount the decoration cover onto the
camera.
Align the tabs with the projections of
the decoration cover and press up on
the camera's decoration cover.
Tabs
Match the tabs
to the projections
Projections
15. Rotate the camera's decoration cover
clockwise.