Use And Operation - Klarstein 10032527 Mode D'emploi

EN
20

USE AND OPERATION

Notes on setting the timer
Use the TIMER button
Note: You can not set the weekly timer by the control panel, but you can set the day
timer. The day setting time is 30 (min) - 1H - 2H - 3H ... up to 8H. The previous screen
display shows the settled number (1/2/3...8) and later shows H (Hour). By remote
control you can set both the day and weekly timer, the specifications are as below.
Set present time
To set the present time the appliance must be turned off, but the power must be on at the
socket.
1. Press and hold the TIMER button for 5 seconds, the digit of the tube flashes, then
press [+] and [-] button to set the day of the week :
1 = Monday
2 = Tuesday
3 = Wednesday
4 = Thursday
5 = Friday
6 = Saturday
7 = Sunday
2. Press TIMER button a second time, the first digit of the digital tube will flash, then
press [+] and [-] button to set the hour (10:00 for example).
3. Press TIMER button a third time, the first digit of the digital tube is always bright, the
last digit flashing, then set minute (10:47 for example).
4. Press TIMER button again to set the current time calibration setting and turn on the
power. The digital display shows the ambient temperature. Then you can set weekly
timer regularly.
to turn on the daily or weekly timer.