Maintenance And Cleaning; Declaration Of Conformity - Mettler Toledo AL Mode D'emploi

Appendix
32

7.4 Maintenance and cleaning

Service
Regular servicing of your balance by a service technician prolongs its working life. Ask your METTLER TOLEDO dealer for details of
servicing options.
Cleaning
Wipe housing and weighing pan with a soft, lint-free cloth, and – if necessary – with a mild cleaning agent, e.g. soap solution.
Protect balance and weighing pan from soiling. Soiled In-use covers can be replaced on all balance types (see Section 6.3).
Note
After working with chemicals, it is advisable to wash or clean the weighing pan and the bottom plate (if draft shield fitted).
Although all materials are of high quality, corrosion may occur if corrosive substances are deposited on chrome steel for an
extended period of time (and if air is excluded, for example by a coating of grease).
Important
Defective instruments must be disposed of in accordance with applicable customer and national regulations.

7.5 Declaration of conformity

The undersigned declare on behalf of
Mettler-Toledo GmbH
Im Langacher
CH-8606 Greifensee
that the balances METTLER TOLEDO AL... / PL... / PL...-S to which this declaration relates (serial number specified on the
product) are in compliance with the below mentioned EEC Directives (including all amendments)
73/23/EEC Low Voltage Directive
89/336/EEC Electromagnetic compatibility
and that following standards have been applied IEC/EN61010-1:2001, IEC/EN61326-1:1997+ A1:98 (class B)
for Canada, USA and Australia CAN/CSA-C22.2 No.1010.1-92, UL Std. No.3101-1, FCC, Part 15, class A
Balances in certified version additionally compliy with 90/384/EEC Non-automatic weighing instruments and standard EN45501.
EC type approval No:
Greifensee, 26.06.2004
Mettler-Toledo GmbH
Laboratory & Weighing Technologies
René Lenggenhager
General Manager
– AL balances: D03-09-027
– PL-S balances: D03-09-005
Sascha von Wangenheim
Manager Sales & Marketing