How To Unlock Diskashur M; With User Pin; Changing The User Pin In User Mode - iStorage DISKASHUR M2 Manuel De L'utilisateur

13.

How to Unlock diskAshur M

To unlock the diskAshur M
2
1. In a standby state (solid
down both the SHIFT ( ) + KEY ( ) buttons
2. Enter User PIN and press the KEY ( ) button once
14.

Changing the User PIN in User Mode

To change the User PIN, first unlock the diskAshur M
(solid GREEN LED) proceed with the following steps.
1. In User mode (GREEN LED) press and hold down
both KEY ( ) + 4 buttons
2. Enter your Existing User PIN and press the KEY ( )
button once
3. Enter New User PIN and press the KEY ( )
button once
4. Re-enter New User PIN and press the KEY ( )
button once
Important:
configured as described in section 7, which imposes a minimum PIN length and whether a 'Special Character' has been
used.
#14
with the User PIN, proceed with the following steps.
RED LED) Press and hold
with the User PIN as described in section 13. Once the drive is in User Mode
2
Changing the User PIN in User mode

with User PIN

2
RED LED switches to all LEDs, RED,
BLUE
RED,
to alternating
solid
unlocked in User Mode
Solid
GREEN
GREEN
off and will then switch to a single
blink and then back to blinking
BLUE
Blinking
a single
GREEN
Blinking
to a rapidly blinking
solid
successfully changed
(GREEN LED) must comply with the 'User PIN Policy' if one has been
www.istorage-uk.com
blinking on and off
GREEN and BLUE blinking LEDs will change
GREEN and BLUE LEDs then to a
GREEN LED indicating drive successfully
GREEN LED will change to all LEDs, RED,
& BLUE blinking on and off
and solid BLUE LEDs will alternate on and
GREEN
GREEN
LEDs
GREEN and solid BLUE LEDs will switch to
GREEN LED blink and then back to blinking
and solid BLUE LEDs
GREEN and solid BLUE LEDs will switch
GREEN LED and then to a
GREEN LED indicating the User PIN has been
GREEN &
LED
and solid