Getting Started; Cancel The Demonstration; Set The Clock And Date; Set The Basic Settings - JVC KD-X241 Manuel D'instructions

Masquer les pouces Voir aussi pour KD-X241:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

GETTING STARTED

1

Cancel the demonstration

When you turn on the power (or after you reset the unit), the display
shows: "CANCEL DEMO"  "PRESS"  "VOLUME KNOB"
1
Press the volume knob.
[YES] is selected for the initial setup.
2
Press the volume knob again.
"DEMO OFF" appears.
2

Set the clock and date

1
Press and hold
.
2
Turn the volume knob to select [CLOCK], then press the knob.
To adjust the clock
3
Turn the volume knob to select [CLOCK ADJUST], then press the
knob.
4
Turn the volume knob to make the settings, then press the knob.
Hour  Minute
5
Turn the volume knob to select [CLOCK FORMAT], then press the
knob.
6
Turn the volume knob to select [12H] or [24H], then press the
knob.
To set the date
7
Turn the volume knob to select [DATE SET], then press the knob.
8
Turn the volume knob to make the settings, then press the knob.
Day  Month  Year
9
Press
to exit.
To return to the previous setting item, press
4
ENGLISH
3
1
Press and hold
2
Turn the volume knob to select an item (see the following table), then
press the knob.
3
Repeat step
4
Press
To return to the previous setting item, press
SYSTEM
KEY BEEP
SOURCE SELECT
AM SRC *
BUILT-IN AUX * ON: Enables AUX in source selection. ; OFF: Disables. ( 8)
F/W UPDATE
UPDATE SYSTEM
F/W UP xxxx
CLOCK
TIME SYNC
CLOCK DISPLAY ON: The clock time is shown on the display even when the unit is turned off. ;
ENGLISH
РУССКИЙ
ESPANOL
.
* Not displayed when the corresponding source is selected.

Set the basic settings

.
2
until the desired item is selected or activated.
to exit.
ON: Activates the keypress tone. ; OFF: Deactivates.
ON: Enables AM in source selection. ; OFF: Disables. ( 7)
YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not
activated).
For details on how to update the firmware, see:
<http://www.jvc.net/cs/car/>.
ON: The clock time is automatically set using the Clock Time (CT) data in FM
Radio Data System signal. ; OFF: Cancels.
OFF: Cancels.
Select the display language for menu and music information if applicable.
By default, ENGLISH is selected.
.
Default: XX

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Kd-x141

Table des Matières