Troubleshooting - JVC KD-X241 Manuel D'instructions

REFERENCES
Change the display information
Each time you press , the display information changes.
• If the information is unavailable or not recorded, "NO TEXT", "NO NAME", or other
information (eg. station name) appears.
Source name Display information
FM or AM Frequency (Date/Clock)
(For FM Radio Data System stations only)
Station name (PS)/Program type (PTY) (Date/Clock)
Clock) Radio text+ (Radio text+)
(Date/Clock) Frequency (Date/Clock)
USB (For MP3/WMA/WAV/FLAC files)
Song title (Artist)
File name (Folder name)
(Date/Clock) (back to the beginning)
iPod or When [HEAD MODE]/[AUTO MODE] is selected ( 6):
ANDROID Song title (Artist)
Playing time (Date/Clock)
AUX AUX (Date/Clock)
Radio text (Date/
Song title (Artist) Song title
(back to the beginning)
Song title (Album name) Song title (Date/Clock)
File name (Date/Clock) Playing time
Song title (Album name) Song title (Date/Clock)
(back to the beginning)

TROUBLESHOOTING

Symptom Remedy
Sound cannot be heard. • Adjust the volume to the optimum level.
• Check the cords and connections.
"MISWIRING CHECK Turn the power off, then check to be sure the terminals of
WIRING THEN PWR ON" the speaker wires are insulated properly. Turn the power
appears. on again.
"PROTECTING SEND Send the unit to the nearest service center.
SERVICE" appears.
Source cannot be selected. Check the [SOURCE SELECT] setting. ( 4)
• Radio reception is poor. Connect the antenna firmly.
• Static noise while
listening to the radio.
Playback order is not as The playback order is determined by the file name .
intended.
Elapsed playing time is not This depends on the recording process earlier.
correct.
"NOT SUPPORT" appears Check whether the file is a playable format. ( 12)
and file skips.
"READING" keeps flashing. • Do not use too many hierarchical levels and folders.
• Reattach the USB device.
"CANNOT PLAY" flashes • Check whether the connected device is compatible with
and/or connected device this unit and ensure the files are in supported formats.
cannot be detected. ( 12)
• Reattach the device.
The iPod/iPhone does not • Check the connection between this unit and iPod/iPhone.
turn on or does not work • Detach and reset the iPod/iPhone using hard reset.
Correct characters are not • This unit can only display uppercase letters, numbers, and
displayed. a limited number of symbols.
• Depending on the display language you have selected
( 4), some characters may not be displayed correctly.
13
ENGLISH