Inspections And Maintenance By Dealer - Stihl FS 45 Notice D'emploi

English
5
Straighten out the nylon lines and
N
wind them tightly on to the spool –
one nylon line in each chamber.
Engage the ends of the lines in the
N
notches (5).
Assembling the mowing head
Check that the spring is installed (see
"Mounting the Cutting Attachment").
26
5
6
Thread the ends of the lines (6)
N
through the sleeves (7) and push
the spool (2) into the head so that it
snaps into position.
The nylon lines must disengage from the
notches (5) as the spool is pushed into
position.
Pull out the ends of the lines as far
N
as stop.
Mount the mowing head on the
N
machine.
Inspections and Maintenance
by Dealer
2
Maintenance Work
STIHL recommends that you have
servicing and repair work carried out
exclusively by an authorized STIHL
6
servicing dealer.
7
Fuel Pickup Body in Tank
Have the pickup body in the fuel
N
tank replaced every year.
Spark Arrestor in Muffler
If the engine is low on power, have
N
your dealer check the spark arrestor
(country-specific option) in the
muffler.
FS 45, FS 46