Parts Supplied; Before Installing This Product - Pioneer SPH-DA100 Manuel D'installation

Installation

Parts supplied

Parts marked (*) are pre-installed.
The display unit
Flush surface screw
(5 mm × 9 mm)
(6 pcs.)
Trim ring*

Before installing this product

1 Remove the trim ring.
Extend top and bottom of the trim ring
outwards to remove the trim ring.
Holder*
Truss head crew
(5 mm × 8 mm)
2 Insert the supplied extraction keys
(6 pcs.)
into both sides of the unit until they
click into place.
3
Extraction key
(2 pcs.)
Trim ring
Pull the unit out of the holder.
Extraction key
Section
03
15
Engb