Additional Information - USRobotics R24.0692.00 Guide D'installation Rapide

My ISP requires me to use a specific MAC address for the device
that connects to my modem.
Solution:
Your ISP may require you to change the router's MAC address to match a specific MAC
address, such as the address of the Ethernet adapter that was previously connected to the
DSL or Cable modem. If you need the router to clone a MAC address:
1. Complete the installation instructions in this guide.
2. When you are returned to the configuration pages after the initial configuration, click
the tab.
Internet
3. Under
Clone MAC address
should be applied to the router.
4. When you are finished, click
Internet connection.

Additional Information

For regulatory and warranty information, see the User Guide on the USRobotics Instal-
lation CD-ROM.
For operation and configuration information, see the User Guide on the USRobotics
Installation CD-ROM. The User Guide contains detailed information on the use and con-
figuration of your Wireless
For expanded troubleshooting and additional information:
1. See the User Guide on the USRobotics Installation CD-ROM.
2. Go to the Support section of the USRobotics Web site at
www.usr.com/support/.
Many of the most common difficulties that customers experience have been
addressed in the FAQ and Troubleshooting Web pages for your Wireless
The Support pages also contain information on the latest firmware and may contain
documentation updates.
3. Submit your technical support question using an online form, or contact the
USRobotics Technical Support Department.
4. See the Support contact information on the last page of this guide.
, use the
Client devices
. The router will restart and you should then have an
Save
N
dx Router.
list to select the MAC address that
English
N
dx Router.
11