USRobotics R24.0692.00 Guide D'installation Rapide page 11

Install a USB Printer
A USB printer can be connected to the Wireless
printer if both your operating system and your printer support the Internet Printing Pro-
tocol (IPP). Windows Server
built-in support for this function. Contact your printer manufacturer to determine if your
printer supports IPP.
When used with multi-function printers that scan and copy, the Wireless
N o t e :
Router only supports printing. For bi-directional communication features such
as scanning, connect the multi-function printer directly to the computer. Also,
notifications, such as low ink or add paper, will not be transmitted from the
N
Wireless
For instructions on printer installation for Windows Me and 98SE, Mac, and Linux, see
the User Guide on the USRobotics Installation CD-ROM.
Step One: Local Printer Installation
If the printer has already been installed on every computer that will use it once
N o t e :
it is on the network, skip to Step Two: Get Your Print Server Information.
Before connecting your printer to the print server, it is important to install the drivers pro-
vided by the printer manufacturer on each computer that will use the printer.
1. Plug your USB printer into one of the USB ports on the computer.
2. Install the printer by following the installation instructions included with your printer.
3. Print a test page to ensure that the printer is working properly.
4. Power off the printer.
Step Two: Get Your Print Server Information
1. Disconnect the printer from your computer and plug the thin rectangular end of the
USB cable into the
WAN 1 2 3 4
2. Turn your printer on.
3. On your computer, start a Web browser.
4. In the location or address line type
router configuration pages.
5. Enter the user name and the password for your router and click
6. On the page, look for the
Status
section.
Device
7. Write down the
computers that are connected to your network that you want to have access to the
printer.
®
2003, Windows Vista™, Windows
dx Router to your computer.
port on the Wireless
USB
USB
Secure
15VDC
Easy
Setup
Reset
192.168.2.1
Printer status
address. You need the address to set up the printer on
Printer location
N
dx Router and used as a network
®
XP and 2000 have
N
dx Router.
and press ENTER to access the
OK
and
Printer location
English
N
dx
.
information in the
7