1 About this manual
Read all the documentation supplied carefully before
installing and using this product. Keep the manual in
a convenient place for future reference.
1.1 Typographical conventions
DANGER!
High level hazard.
Risk of electric shock. Disconnect the
power supply before proceeding with any
operation, unless indicated otherwise.
CAUTION!
Medium level hazard.
This operation is very important for the
system to function properly. Please read
the procedure described very carefully and
carry it out as instructed.
INFO
Description of system specifications.
We recommend reading this part carefully
in order to understand the subsequent
stages.
2 Notes on copyright and
information on trademarks
The mentioned names of products or companies are
trademarks or registered trademarks.
MNVCCOMB_2131_EN
3 Safety rules
DANGER!
High level hazard.
Risk of electric shock. Disconnect the
power supply before proceeding with any
operation, unless indicated otherwise.
• Before starting any operation, make sure the
power supply is disconnected.
• A power disconnect device must be included
in the electrical installation, and it must be very
quickly recognizable and operated if needed.
• Be careful not to use cables that seem worn or old.
• The electrical system to which the unit is
connected must be equipped with a 16A max (20A
max for North America) automatic bipolar circuit
breaker. The minimum distance between the circuit
breaker contacts must be 3mm (0.1in). The circuit
breaker must be provided with protection against
the fault current towards the ground (differential)
and the overcurrent (magnetothermal).
• This equipment is not suitable for use in locations
where children are likely to be present.
5