Preparing The Product For Use; Unpacking; Safely Disposing Of Packaging Material; Product Opening - Videotec COMB Manuel D'instructions

5 Preparing the product for
use

5.1 Unpacking

When the product is delivered, make sure that the
package is intact and that there are no signs that it
has been dropped or scratched.
If there are obvious signs of damage, contact the
supplier immediately.
When returning a faulty product we recommend
using the original packaging for shipping.
Keep the packaging in case you need to send the
product for repairs.
5.2 Contents
Check the contents to make sure they correspond
with the list of materials as below:
• Communication box
• Instruction manuals
• Fixing flanges
• Cable ties (3)
• Bolts and screws
5.3 Safely disposing of packaging
material
The packaging material can all be recycled. The
installer technician will be responsible for separating
the material for disposal, and in any case for
compliance with the legislation in force where the
device is to be used.
10

5.4 Product opening

During product opening and closing
operations, be careful not to damage the
cover gasket.
Unscrew the 4 screws and remove the cover.
Fig. 5
MNVCCOMB_2131_EN