Beko CHP 30100 CF Mode D'emploi page 15

4
• Plug connector into the motor.
Attachment
screw
Fig. 1: Single motor installation (30" range hood
model only)
Install the grease ter and turn power on at
service panel.
Check operation of the hood.
If range hood does not operate:
• Check that the circuit breaker is not tripped or
the house fuse blown.
• Disconnect power supply. Check that wiring is
correct.
To get the most e nt use from your new range
hood, read the "Use and Care Information" section.
Keep your Installation Instructions and Use and
Care Guide close to range hood for easy reference.
Range Hood / User Manual
A
B
C
A. Mounting hole
B. Washer
C. Mounting screw
15 / 59 EN