Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4.
Install winch mounting plate to front guard square tubes
using u-bolts supplied and factory front guard bolts.
Slide mounting plate forward before tightening fasteners.
5.
Install fairlead assembly to winch mounting plate using M10
carriage bolts and nuts.
6.
Route winch rope through fairlead and attach hook. Refer to
winch kit instructions.
7. Install winch to mounting plate using M8 x 20mm bolts and
lock washers supplied with winch kit.
8.
Remove shipping screw. Refer to winch kit instructions.
©2014 Warn Industries, Inc.WARN® and the WARN logo are trademarks of Warn Industries Inc.
5
93721A1
Publicité
Table des Matières
