Roca IN-WASH INSPIRA Mode D'emploi page 15

1. Safety
1.1 Warning - precautions
1.1.1 General warnings
1.1.2 Installation precautions
1.1.3 Precautions for use
1.1.4 Maintenance precautions
1.2 Environmental conditions
2. Introduction
2.1 Product parts
2.2 Start-up
2.2.1 Connection of the remote control and self-calibration
2.2.2 Use of the product
3. Operation
3.1 Functions by remote control
3.1.1 Perineal cleaning function
3.1.2 Anal cleaning function
3.1.3 Drying function
3.1.4 Stop function
3.2 Settings with the remote control
3.2.1 Setting of temperature
3.2.2 Setting of water pressure
3.2.3 Setting of position
3.3 Auxiliary side control
3.3.1 Anal cleaning with auxiliary side control
3.3.2 Drying with auxiliary side control
3.3.3 Stop with the auxiliary side panel
1. SAFETY
1.1 WARNING - PRECAUTIONS
❚
Please read this manual carefully before using the product, and keep it at hand for future reference.
A negligence or an incorrect use of the product can lead to serious injuries.
The In-Wash Inspira is not suitable to be used by individuals (including children) with physical, sen-
sory or mental disabilities or who lack the experience or knowledge to use it, unless, for their own
safety, they are monitored by a responsible person or they receive instructions on how to use it.
Make sure that children do not play with the device.
When using electric devices, basic safety measures should always be followed; make sure you take
into account the following:
1.1.1 GENERAL WARNINGS
Regarding the packaging:
• The packaging of the In-Wash Inspira is not a toy.
• Do not allow children to play with the plastic bags or with the packaging material as they may pre-
sent a risk of suffocation or injuries. Keep therefore the material in a safe place or get rid of it following
the environmental rules.
Regarding the anal and perineal cleaning:
• Do not use the device beyond the time established in each cycle. If you do it, you may be altering
your body´s natural balance.
15 3.4 Change in the pre-set settings
3.4.1 Customisation of the cleaning and drying settings
15
3.4.2 Operating modes led lights
15
3.4.3 Silence mode
16
3.5 Return to default settings
16
3.6 Turning off (stand-by) / reset of the product
17
4. Cleaning and maintenance
17
17
4.1 General cleaning
4.2 Cleaning of the nozzle / tip replacement
17
4.3 Descaling of the tip
17
4.4 Cleaning of the filter
17
4.5 Change of batteries in the remote control
18
4.6 Stop due to prolonged absence
18
4.7 Removal of seat and cover
18
5. Troubleshooting
18
6. Technical features
18
18 6.1 Features / specifications
18
7. Disposal of electric and electronic products
19
19
19
19
19
19
19
19
19
19
20
20
20
21
21
21
21
22
22
22
22
23
23
24
24
25
15