Troubleshooting; Disposal - Samsung DCB-B270R Consignes D'utilisation

Problem
No display LED on
the front panel;
No power supply
No pictures on the screen
No sound
Remote Control does not
operate directly
Poor picture quality
signal strength in
On-Screen Error Messages: cable not connected or not
"Searching for signal"
"No signal"
On-Screen Error Message
"No programs are stored"
On-Screen Error Messages:
"Smartcard failure"
"Unknown smartcard"
"Please insert Smartcard".

DISPOSAL

The device, packaging material (e.g. Styrofoam) and the batteries must never be disposed of
with household refuse. Please obtain appropriate information about the regulations in your
community, and dispose of all refuse in accordance with regulations at the separate locations
provided.
L E R E C E

TROUBLESHOOTING

Possible cause
Power cord
not plugged in correctly
Receiver in Standby mode;
SCART not connected tightly
to video output of television;
incorrect channel or video
output selected on television
SCART connected incorrectly;
Loudness level = 0;
Muting active
Incorrect operation;
Batteries dead or inserted
incorrectly
Signal strength too low
tight
Channel lists not installed
Smartcard:
- not plugged in correctly;
- not plugged in.
I V E R
Solution of the problem
Power cord plug in correctly
Set receiver to "On";
Check connection;
Check channel and video output
(TV instruction manual)
Check connection;
Increase loudness on television set;
Press the MUTE key
Point remote control
towards the Receiver.
Replace batteries or insert correctly
Check all wire connections.
Check connection
Scan channels. Please go to Installation
menu
(depend on model)
Check the Smartcard.
"Insert the Smartcard."
GB-25