Timer; Scheduled Timers; Manual Setting; Guard Band Time - Samsung DCB-B270R Consignes D'utilisation

3. Timer

Through this menu you can reserve the programs and
configure the settings.

3.1 Scheduled Timers

You can see the channels you reserved through EPG or
manual settings.
●
To add the timers press the RED key. You can reserve
the program manually.
●
To edit the timers press the GREEN key after
highlighting the cursor on the program you want to edit.
But it is impossible to edit the timers which was set
through EPG.
●
To delete the timers press the BLUE key after
highlighting the cursor on the program you want to
delete.

3.2 Manual Setting

You can reserve the programs manually.
Set channel, date, start/end time and frequency by using
¦ / ‹ or œ / ƒ keys
3.3 Guard-Band Time
Guard-Band time is a function to ensure, that whole event
will fit in set time boundaries. 1 minute of Guard-Band
Time means that STB will start this timer operation 1
minute before set time and end 1 minute after set time.
N N o o t t e e : If the timers are conflicted with guard-band
time, they will not be reserved.
L E R E C E
OPERATING THE RECEIVER
I V E R GB-19