Knick Portavo 908 MULTI Instructions page 51

Specifications
Communication
Profile
Usage
Diagnostics functions
Sensor data
(Memosens only)
Calibration data
Device self-test
Device data
Data retention
EMC
Emitted interference
Immunity to interference
RoHS conformity
Power supply
Nominal operating conditions
Ambient temperature
Transport/
Storage temperature
Relative humidity
Housing
Material
Protection
Dimensions
Weight
Printer
pH
USB 2.0
HID, driverless installation
Data exchange and configuration via Paraly SW 112 software
Manufacturer, sensor type, serial number, wear, operating time,
remaining lifetime, max. temperature, adaptive calibration timer,
calibration and adjustment data, SIP, CIP and autoclaving counter
Calibration date; pH/Oxy: zero, slope; Cond: Cell constant
Automatic memory test (FLASH, EEPROM, RAM)
Device type, software version, hardware version
Parameters, calibration data > 10 years
EN 61326-1 (General Requirements)
Class B (residential environment)
Industrial environment
EN 61326-2-3 (Particular Requirements for Transmitters)
According to directive 2011/65/EU
4 x AA alkaline batteries or
1x Li-ion battery, USB chargeable
-10 ... +55 °C / 14 ... +131 °F
-25 ... +70 °C / -13 ... +158 °F
0 ... 95 %, short-term condensing allowed
PA12 GF30 (silver gray RAL 7001) + TPE (black)
IP66/67 with pressure compensation
Approx. (132 x 156 x 30) mm
Approx. 500 g
Printer protocols: HP-PCL, Epson, Samsung, IBM
(ASCII texts)
Connection via standard USB cable and USB adapter
(A female to B male)
ORP Oxy Cond
51