Printing A Calibration Record - Knick Portavo 908 MULTI Instructions

Printing

Printing a Calibration Record

1) Use the included USB adapter (A female to B male) to connect a printer to the
micro USB port of the meter and switch it on.
2) Switch the meter on using the on/off or meas key.
3) Open the "Info" menu.
4) Select "Calibration record" (must have been created before).
5) Press the right softkey: Print (see previous page for configuration).
You will receive a printout of the calibration record with date and time stamp
(example):
calibration record
Date
Device 1nLormac1on
Manufacturer
Serial no.
Device type
SW version
Sensor information
Sensor model
Manufacturer
Order no.
Serial no.
SW version
li-W version
TAG
Temp offset
Ot;:>erating time
Wear
SIP
Calibration data
D
Date of calibration
Zero point
Slope
Buffer 1
Buffer 2
pH
04.01.2016 09:19
Knick
0003791
908 MULTI
1.5.0 Build 10931
Memos ens
pH
Knick
SE515/1-MS
10000
1.0.6
5 2
0 0.5.L!
0.0 K
0 h
0 %
0
03.01.12
12:00
pH 7.000 I o.o
100.000 %
I
pH 4.010
pH 9.210
ORP Oxy Cond
mv
59. 2 mV
33