References; Maintenance; More Information - JVC KW-R920BT Manuel D'instructions

DISPLAY SETTINGS
BRIGHTNESS Set the brightness for button and display illuminations for day and night separately.
1 DAY / NIGHT: Select day or night.
2 Select a zone. ( 21)
3 Set the brightness level (00 to 31). (Default: DAY: 31 ; NIGHT: 11)
2
SCROLL * ONCE: Scrolls the display information once. ; AUTO: Repeats scrolling at 5-second intervals. ;
OFF: Cancels.
COLOR
PRESET Select color for display and button illuminations separately.
Default color:
ALL ZONE: [COLOR 08], DISP ZONE: [COLOR 01],
ZONE 1: [COLOR 08], ZONE 2: [COLOR 46]
1 Select a zone. ( 21)
2 Select a color for the selected zone.
• COLOR 01 to COLOR 49
• USER: The color you have created for [DAY COLOR] or [NIGHT COLOR] is shown.
• COLOR FLOW01 to COLOR FLOW03: Color changes at different speeds.
• GROOVE/ TECHNO/ EMOTION/ RELAX/ SPECTRUM/ SWEEP/ POP: The selected color
pattern is shown.*
DAY COLOR Store your own day and night colors for different zone.
1 Select a zone. ( 21)
2 RED / GREEN / BLUE: Select a primary color.
3 00 to 31: Select the level.
NIGHT COLOR
Repeat steps 2 and 3 for all the primary colors.
• Your setting is stored to [USER] in [PRESET].
• If [00] is selected for all primary colors for [DISP ZONE], nothing appears on the display.
COLOR GUIDE ON: Changes the button and display illuminations when settings are performed on menu and
list search. Display zone will automatically change depending on volume level. ; OFF: Cancels.
[NIGHT COLOR] or [DAY COLOR] is changed by turning on or off your car's headlight.
* 1
The illumination control wire connection is required. ( 29, 30)
* 2
Some characters or symbols will not be shown correctly (or will be blanked).
* 3
If one of these color pattern is selected, the [ZONE 1], [DISP ZONE], [ZONE 2] illumination color will change
to the default color.
22
3
(Selectable only when [ALL ZONE] is selected in step

REFERENCES

Maintenance

Cleaning the unit
Wipe off dirt on the faceplate with a dry silicone or soft cloth.
Handling discs:
• Do not touch the recording surface of the disc.
• Do not stick tape etc. on the disc, or use a disc with tape stuck on it.
• Do not use any accessories for the disc.
• Clean from the center of the disc and move outward.
• Clean the disc with a dry silicone or soft cloth. Do not use any solvents.
• When removing discs from this unit, pull them out horizontally.
• Remove burrs from the center hole and disc edge before inserting a disc.

More information

Visit also the following website <http://www.jvc.net/cs/car/> for:
– Latest firmware updates and latest compatible item list
– Android™ application JVC MUSIC PLAY
– Any other latest information
1
.)
General
• This unit can only play the following CDs:
• DualDisc playback: The Non-DVD side of a "DualDisc" does not comply
with the "Compact Disc Digital Audio" standard. Therefore, the use of
Non-DVD side of a DualDisc on this product cannot be recommended.
• Detailed information and notes about the playable audio files are stated in
an online manual on the following website
<http://www.jvc.net/cs/car/>.