Klein Tools CL150 Mode D'emploi page 3

To ensure safe operation and service of the meter, follow these
instructions. Failure to observe these warnings can result in
severe injury or death.
• Read the instructions to ensure safe operation.
• Test on known live circuit before using.
• Never use the meter on a circuit with voltages that exceed the
category based rating of this meter.
• Do not use the meter during electrical storms or in wet
weather.
• Do not use the meter if it appears to be damaged; or if any
inner copper wire is exposed.
• To avoid false readings, replace the battery as soon as the low
battery indicator appears.
• Avoid using the meter around strong electromagnetic fields.
• Always adhere to local and national safety codes. Use personal
protective equipment to prevent shock and arc blast injury
where hazardous live conductors are exposed.
• Do not operate meter while battery door is removed.
• If the equipment is used in a manner not specified by the
manufacturer, the protection provided by the equipment may
be impaired.
Warning or Caution
Double Insulated Class II
Read Instructions
AC (Alternating Current)
Low Battery
MAX Maximum Value Hold
Auto-Power Off
WARNINGS
SYMBOLS ON METER
SYMBOLS ON LCD
Do not apply around or
remove from HAZARDOUS
LIVE conductors.
Amperage (Amps)
Data Hold
MIN Minimum Value Hold
3