Using Your Electronic Control; Adjusting The Temperature; Control Lock - AGA marvel MO24RFS Instructions D'installation, D'utilisation Et D'entretien

Turning your appliance ON and OFF:
If the appliance is "On", (and out of sleep mode) the
temperature will be shown in the display area of the
control. To turn the appliance "Off", press and hold the
"On/Off" keypad for 4-seconds. "OFF" will now be
displayed on the control.
To turn the appliance "On", press and hold the "On/Off"
keypad for 4-seconds.

Adjusting the temperature:

NOTE
Loading warm contents may trigger a temperature alarm,
see temperature alarm page 13. Depending on the quantity
and/or weight of warm contents, it may take 48 hours for
the compartment temperature to stabilize.
When making temperature set-point changes, it may take
up to 24-hours for the stored contents to stabilize at your
new set-point temperature.
Factors that affect the storage compartment stabilized
temperature:
•
Changes to temperature setting.
•
Room temperature changes.
•
Temperature of stored contents. - Loading warm
contents.
- Cold content load will delay the change to a warmer
set-point temperature.
- Warm content load will delay the change to a colder
set-point temperature.
•
Usage, (number and duration of the door openings).
•
Installation of the appliance in direct sunlight or next to
a heat
REF
FRZ
FreezerRefrigerator
selectedselected

USING YOUR ELECTRONIC CONTROL

source.
REF
FRZ
compartmentcompartment
Temperatures can be set for each individual compartment
(refrigerator or freezer / ice-maker). To do so you must first
select the compartment you want to set the temperature
for.
You do so by pressing the refrigerator (REF) or freezer
(FRZ) button on the display. When pressed the LED light
will be illuminated for the respective display.
To change the set temperature for a particular
compartment, with the compartment enabled and out of
sleep mode, press the "-" or "+" keypads. "SET" will be
indicated on the user interface panel and the current set-
point temperature will display and flash. Subsequent
presses of the "-" or "+" keypads will adjust the temperature
colder or warmer respectively. When you have reached
your desired set-point temperature, press the "On/Off"
keypad to accept, or do nothing and the "Set" mode will
time-out in 10-seconds accepting the displayed
temperature as the new set-point.
The available set-point temperature range for your
appliance is -6°F (-21°C) to 6°F (-14°C) for the freezer
compartment (ice-maker) and 34°F (1.2°C) to 42°F (5.7°C)
for the refrigerator compartment. If you attempt to adjust
the temperature outside of these ranges you will receive an
audible notification.
The temperature mode is preset from the factory in
Fahrenheit (°F) but you have the option to change it to
Centigrade (°C). To change the mode, press and hold the
"-" keypad, while pressing the "+" keypad, then release the
"-" keypad. The temperature will now be displayed in
Centigrade (°C). Repeat the procedure to change the
temperature mode back to Fahrenheit (°F).

Control lock:

14