Instruction Sheet - 3B SCIENTIFIC PHYSICS 8497500 Mode D'emploi

3B SCIENTIFIC ® PHYSICS

Instruction sheet

12/06 SP
1. Description
The Waltenhofen pendulum is used to demonstrate
the working of an eddy current brake and its effect.
A pendulum rod is attached by means of a magnet to
a bearing rod. Four different pendulum bodies are
provided for the experiments. A heavy rectangular
aluminium pendulum disc oscillates between the
poles of an electromagnet that is switched off. When
the electromagnet is switched on, the oscillating
motion of the aluminium disc ceases within a very
short time, owing to the magnetic field generated by
the electromagnet. If the disc/plate is slotted, then
the time required for the oscillating motion to stop is
extended, i.e. there is a strong reduction in the brak-
ing effect.
Waltenhofen pendulum 8497500
2. Scope of delivery
1 Pendulum rod with bearing rod and slotted
clamp
4 Aluminium pendulum discs:
Rectangular plate and slotted rectangular plate
Disc
Ring
Slotted ring
3. Technical data
Rectangular plate:
Disc:
Ring
Slotted ring:
Pendulum rod:
1
1 Slotted aluminium ring
2 Aluminium ring
3 Aluminium disc
4 Stand rod (not included within
the scope of delivery)
5 Clamp (not included within the
scope of delivery)
6 Bearing rod
7 Roll axis
8 Pendulum rod
9 Slotted clamp with knurled
screw
10 Rectangular aluminium plate
65 mm x 86 mm, 29 g
78 mm ø, 26 g
70 mm ø, 21 g
70 mm ø, 20 g
80 mm x 275 mm, 112 g