Operation; Manual Mode; Wireless Infrared Remote Control (Irc-6) - Chauvet DJ EZ LASER RB Mode D'emploi

4. O
PERATION
·
This product is not designed for continual use. Make sure there are regular breaks during
operation to maximize the life of your laser.
·
Always disconnect the EZ Laser RGFX/RB from power when not in use.

Manual Mode

Wireless
Infrared Remote
Control (IRC-6)
EZ Laser RGFX/RB User Manual Rev. 2
Access the two different operating modes available in this product by using
the <MODE> button on the rear panel.
·
Press <MODE> to cycle through the modes.
Mode Description
1 Automatic
2 Sound-Active
3 Automatic / Sound-Active
Note: Product will Blackout
received within 3 seconds.
The wireless remote (IR) will immediately override the <MODE> button. No
additional settings are required.
This product is compatible with the IRC-6 remote from Chauvet DJ.
The following IRC-6 buttons are used, with the EZ Laser RGFX/RB:
·
·
·
·
·
·
·
·
·
*Color options vary by Laser model
·
All other buttons on the remote have no function with this product.
·
The IRC-6 will not respond to any inputs when BlackOut is
activated. If the remote does not respond when a button is pressed,
try pressing <BLACK OUT>. You may have inadvertently activated
Black Out.
†
‡
†
/ revert to Automatic
<BLACKOUT> - Turns Laser On/Off
<AUTO> - Selects Automatic mode
<SOUND> - Selects Sound-Active mode
<SPEED> - Automatic mode speed
<STROBE> - Strobing (0 – 25 Hz)
<+> / <-> - Increase or decrease
<R> - Manual Red (Add/Remove)*
<G> - Manual Green (Add/Remove)*
<B> - Manual Blue (Add/Remove)*
‡
if no sound is
Page 13 of 48