Technical Information - Chauvet DJ EZ LASER RB Mode D'emploi

5. T
ECHNICAL
Product
Dust build-up reduces light output performance and can cause overheating. To
maintain optimum performance, clean the product at least twice a month.
Maintenance
However, usage and environmental conditions contribute to increasing the
cleaning frequency.
To clean the product, follow the instructions below:
1. Unplug the product from power.
2. Wait until the product is at room temperature.
3. Use a vacuum (or dry compressed air) and a soft brush to remove dust
4. Clean the glass panel (laser aperture) with a mild solution of glass cleaner or
5. Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning
6. Softly wipe any dirt or grime to the outside edges of the glass.
7. Gently polish the lens surface until they are free of haze and lint.
Always dry the optical surfaces carefully after cleaning them.
·
·
Page 14 of 48
I
NFORMATION
collected on the external surfaces and fan vents.
isopropyl alcohol.
tissue.
Do not spin the fan using compressed air because you could damage it.
Do not open this product for cleaning or servicing.
EZ Laser RGFX/RB User Manual Rev. 2