Appendix - Accessories - Riello RLS 800/EV MX Instructions Pour Installation, Utilisation Et Entretien

A

Appendix - Accessories

Output power regulator kit for modulating operation
With the modulating operation, the burner continually adapts the power to the request for heat, ensuring great stability for the param-
eter controlled: temperature or pressure.
Two components should be ordered:
• the output regulator to install on the burner;
• the probe to install on the heat generator.
Parameter to control
Temperature
Pressure
AZL kit (display and operating unit) (only for Russia)
Burner
RLS 800/EV MX
Pressure switch kit (for leak detection control) - (supplied with burner)
Burner
RLS 800/EV MX
Software interface kit
Burner
RLS 800/EV MX
O kit
2
Burner
RLS 800/EV MX
Inverter kit
Burner
RLS 800/EV MX
Soundproofing box kit
Burner
RLS 800/EV MX
Gas trains approved according to EN 676
Refer to the page 23 on the instruction manual.
20010950
Appendix - Accessories
Range
- 100...+ 500°C
0...2,5 bar Probe with output
0...16 bar 4...20 mA
Code
3010469
Code
3010344
Code
3010388
Code
3010378
Code
3010468
Code
3010376
Probe
Type Code
PT 100 3010110
3010213
3010214
34
GB
Output power regulator
Type Code
RWF40 BASIC
3010356
RWF40 HIGH
3010357