Using The Audio Output Being Played Back - Yamaha YRS-1000 Mode D'emploi

Adjusting the audio balance
5
Press TEST when you have completed all
your adjustments.
Notes
• All channel levels cannot be adjusted when the stereo playback
(see page 48), My Surround (see page 43) is selected as the
beam mode.
• "FRONT L/R" cannot be adjusted when Stereo plus 3 Beam is
selected as the beam mode (see page 43).
• "FRONT L/R" are automatically adjusted depending on the
settings of the other channels when Stereo plus 3 Beam or
stereo playback is selected as the beam mode (see pages 43 and
48).
y
If the level of a particular channel cannot be adjusted, "– –dB"
appears in the front panel display.
Using the audio output being
played back
You can also manually adjust the channel levels while
playing back an input source such as a DVD.
CH LEVEL
ENTER
TEST
66
En
TEST
MENU
TV/AV
YSP
RETURN
1
Set the operation mode selector to YSP.
TV/AV
2
Press CH LEVEL repeatedly (or press
CH LEVEL and
you want to adjust.
The front panel display changes as follows:
CH LEVEL
CH LEVEL
Note
"SWFR" is available only when SWFR is selected for BASS
OUT in SOUND MENU (see page 59).
YSP
/ ) to select the channel
or
ENTER
FRONT L +1.0dB
CENTER -2.5dB
FRONT R +1.0dB
SUR.R +2.0dB
SUR.L +2.0dB
SWFR --dB