Using The Sleep Timer - Yamaha YRS-1000 Mode D'emploi

USING THE SLEEP TIMER

Use this feature to automatically set this unit to the standby mode after a specified period of time. The sleep timer is
useful if you are going to sleep after a certain amount of time while this unit is still playing back a source.
INPUT1
TV
AUTO
VOL MODE SETUP
5BEAM ST+3BEAM
1
STEREO
4
7
0
CH LEVEL
TEST
1
Set the operation mode selector to YSP.
TV/AV
YSP
2
Press SLEEP repeatedly to set the interval
for the sleep timer.
Choices: 120min, 90min, 60min, 30min, OFF
The SLEEP indicator flashes in the front panel
display while switching the interval for the sleep
timer.
SLEEP
50
En
Using the sleep timer
TV
INPUT2 MACRO
INPUTMODE SLEEP
3BEAM
2 3
MY SUR.
5 6
8 9
SUR. DECODE
+10
MENU
TV/AV
ENTER
YSP
RETURN
Flashes
Each time you press SLEEP, the front panel display
changes as shown below.
SLEEP 120min
SLEEP 90min
SLEEP 60min
SLEEP 30min
SLEEP OFF
3
Wait for a few seconds without operating this
unit to confirm the setting for the sleep timer.
The SLEEP indicator lights up in the front panel
display, indicating that the sleep timer is activated.
Lights up
SLEEP