Product Description And Specifications; Product Features; Technical Data; Inserting/Changing The Batteries - Bosch GLL 3-80 G Professional Notice Originale

Product Description and
Specifications
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The measuring tool is intended for determining and checking
horizontal and vertical lines.
The measuring tool is suitable for indoor and outdoor use.

Product Features

The numbering of the product features shown refers to the il-
lustration of the measuring tool on the graphic page.
(1) Laser beam outlet aperture
(2) Battery indicator
(3) Pendulum lock indicator
(4) Receiver mode button
(5) Receiver mode indicator
(6) Button for laser operating mode
(7) On/off switch
(8) 1/4" tripod mount
(9) 5/8" tripod mount
(10) Battery compartment cover locking mechanism
(11) Battery compartment cover
(12) Laser warning label
(13) Serial number
(14) Recess for Bluetooth® localisation module
a)
(15) Magnet
a)
(16) Universal holder
a)
(17) Laser target plate
a)
(18) Laser receiver
a)
(19) Laser googles
a)
(20) Protective bag
a)
(21) Tripod
a)
(22) Telescopic rod
a)
(23) Case
a)
(24) Inlay
(25) Bluetooth® localisation module
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.

Technical Data

Line laser
Article number
A)
Working range
– Standard
– in receiver mode
Bosch Power Tools
Line laser
– with laser receiver
Levelling accuracy
Self-levelling range
Levelling time
Operating temperature
Storage temperature
Max. altitude
Relative air humidity max.
Pollution degree according to
IEC 61010-1
Laser class
Laser type
C
6
Divergence
Shortest pulse duration
Compatible laser receiver
Tripod mount
Batteries
Duration of operation with
3 laser planes
Weight according to
EPTA-Procedure 01:2014
Dimensions (length × width ×
height)
Protection rating
A) The working range may be reduced by unfavourable environ-
mental conditions (e.g. direct sunlight).
B) At 20–25 °C
C) Applies to the four horizontal intersection points
D) The values stated presuppose normal to favourable environ-
mental conditions (e.g. no vibration, no fog, no smoke, no direct
sunlight). Extreme fluctuations in temperature can cause devi-
ations in accuracy.
E) Only non-conductive deposits occur, whereby occasional tem-
porary conductivity caused by condensation is expected.
The serial number (13) on the type plate is used to clearly identify
your measuring tool.
Assembly
a)

Inserting/changing the batteries

It is recommended that you use alkaline manganese batter-
ies to operate the measuring tool.
To open the battery compartment cover (11), press on the
locking mechanism (10) and remove the battery compart-
GLL 3‑80 G
ment cover. Insert the batteries.
3 601 K63 Y..
When inserting the batteries, ensure that the polarity is cor-
rect according to the illustration on the inside of the battery
compartment.
30 m
25 m
English | 13
GLL 3‑80 G
5–120 m
B)C)D)
±0.3 mm/m
−10 °C to +40 °C
−20 °C to +70 °C
500–540 nm, <10 mW
50 × 10 mrad (full angle)
1/10000 s
1/4", 5/8"
4 × 1.5 V LR6 (AA)
149 × 84 × 142 mm
IP 54 (dust and
splash-proof)
1 609 92A 7S6 | (03.05.2022)
±4°
<4 s
2000 m
90 %
E)
2
2
10
LR 7
4 h
0.82 kg