Technical Data; Applications; Safety Regulations - EINHELL HES 200 Instructions De Service

Anleitung HES 200 -12sprachig
Description
1. Handle
2. Nameplate
3. On/Off switch (not visible)
4. Lock screw for the depth of cut setting
5. Power cable
6. Splitter
7. Hinged guard hood
8. Allen screw
9. Shoe
10. Flange
11. Saw blade
12. Parallel stop
13. Lock screw for the parallel fence
14. Lock screw for mitre cuts
15. Additional handle
16. Dust extractor connection
Please read the operating instructions carefully and
observe the safety regulations at all costs.
Keep the operating instructions with the hand-held
circular saw.

Technical data

Voltage:
Power rating:
No-load speed:
Cutting depth at 0°:
Saw blade:
Blade bore:
Saw blade thickness
Vibration ¯ a w
Sound pressure levell:
Noise level:
Weight
Dimensions
Features
Parallel stop

Applications

The hand-held circular saw is suitable for sawing
straight cuts in wood, in materials similar to wood,
and in plastics.
09.11.2001 7:13 Uhr

Safety regulations

Adjust the splitter so that it is no more than 5 mm
from the tooth rim of the saw blade and its lowest
point is not retracted more than 5 mm relative to
the tooth rim.
Never use cracked or misshapen saw blades.
Never use saw blades made of high-alloy, high-
speed steel (HSS).
Never use any saw blades that do not conform to
the specifications quoted in these operating
instructions.
Make sure that all the moving parts of the saw
guard work properly without jamming.
Make sure that all the devices which cover the
saw blade work properly.
The splitter must be used and correctly adjusted at
all times except for plunge cuts.
Never use the hand-held circular saw where there
are fumes or combustible liquids.
Use only sharp saw blades and suitable
accessories.
Always pull the plug out of the power socket
before converting or cleaning the saw.
Keep the power cable safe from damage. Oil and
acid can cause damage to the cable.
Never carry the saw by its power cable.
230 V ~ 50 Hz
Never use saw blades with a main plate that is
thicker or a saw set that is smaller than the
1500 W
thickness of the splitter.
5000 rpm
Never remove the plug from the socket by pulling
on the power cable.
70 mm
If the power cable needs to be replaced, call an
200 mm dia.
electrician.
Always arrange for a specialist to carry out repairs.
30 mm dia.
If you use a cable reel, the complete cable must
3.4 mm
be drawn off the reel. The conductor must have a
minimum cross section of 1.5 mm
2,5 m/s 2
rating 16 A.
LPA 104 dB(A)
Do not overload the machine.
Secure all workpieces properly.
LWA 114 dB(A)
Wear goggles and use a dust mask for jobs which
6.8 kg
produce dust.
Wear ear muffs to protect your ears.
38 x 26 x 27.5 cm
Wear suitable clothing (tight-fitting) and keep
sleeves closed.
Keep children away!
For lengthy jobs on wood and when cutting
materials which produce a great deal of dust, the
circular saw should be connected to a suitable
dust extractor.
For lengthy jobs on wood and when cutting
materials which produce a great deal of dust, the
circular saw should be connected to a suitable
dust extractor.
Vibrations were measured in accordance with
ISO 5349.
Seite 7
2 . Maximum fuse
GB
7