Klarstein Duomo Kamado Mode D'emploi page 37

EN
11
Loosen the two pre-assembled screws on the left side of the grill housing and unscrew
the screws about 5 mm. Align the holes on the left shelf (O) with the unscrewed
screws, then press the shelf until it is in place and retighten the unscrewed screws.
Align the other two holes on the left side of the grill case (A) with the two holes under
the tray (O). Insert one screw (AA) into each hole and tighten with a screwdriver.
Repeat the procedure for the right-hand tray (P).
Finally, tighten all screws.
37