Activate Jet Pumps; Multi-Colored Led Light System Operation; Adjusting Individual Jet Flow; Selecting Desired Massage Action - Jacuzzi J-200 Serie Mode D'emploi

J-200
10.2

Activate Jet Pumps

The control panel JETS 1 button activates jets pump 1. The first press
activates low speed, the second press activates high speed, and the third
press shuts jets pump 1 off. The JETS 2 button activates jets pump 2.
The first press activates high speed, the second press turns jets pump 2
off. When manually activated, either pump will automatically turn off after
20 minutes.
10.3

Multi-Colored LED Light System Operation

The multi-colored LED spa light offers seven constant color
variations and three unique random modes for enhanced spa
enjoyment. Press the Light button once to activate the first
light mode Random Fade, then continue pressing the button
to either turn the light off or to select one of seven constant colors,
random solid color mode or strobe mode as illustrated below.
RANDOM
FADE
OFF STROBE
Light Operation Tips:
You must press the light button within 3 seconds of any "off" condition or the
light sequence will revert back to "Random Fade" mode, when reactivated.
Anytime the spa light is manually activated, it will remain on for 1 hour
then automatically shut off.
10.4

Adjusting Individual Jet Flow

The water flow through certain jets in your spa can be
adjusted or turned off by rotating the outside jet ring. Other
jets also offer an adjustable center nozzle that allows you to
change the water discharge angle. Simply tilt the center
nozzle in these jets to the desired angle to customize
your personal massage.
Note: Always keep at least 6 adjustable jets open at all
times to ensure proper filtration characteristics within
spa.
10.5

Selecting Desired Massage Action

For models that incorporate a massage selector valve
(Diverter Jet for J-210, Figure A) that allows you to
customize the massage and performance by diverting
water between various jet systems within the spa. Simply
turn valve to positions A, B or C to divert water pressure
to various jet groups.
Note: The valve is intended to operate in positions A
(Combo), B, or C for optimum performance. It is con-
26
NEAR
WHITE
OFF OFF
Spa Light Sequence
RANDOM
RED
SOLID
LIGHT
BLUE OFF VIOLET
OFF DARK OFF
GREEN
DARK
OFF BLUE
LIME OFF
GREEN
Classic Whirl Jet
Classic Pulsator Jet
Figure A