Tool Update - ATEQ Orange Electronic OE46 Guide D'utilisation

3. TOOL UPDATE

Upgrading your TPMS TOOL
When new vehicles and sensors become available, it is necessary to upgrade your tool. Please
follow the steps below:
IMPORTANT: Temporarily turn off all anti-virus and spam blocking software on your computer.
This is necessary to ensure a successful upgrade.
USB connector
for Internet
update.
3.1. I W
NSTALL
1) Connect the TPMS tool to the USB port and power the tool ON.
2) Insert the CD supplied with your tool into the PC drive and click on the WebVT icon to start the
program.
3) A screen will appear that says "Welcome to the Install Shield Wizard for WebVT." Click
"Next >"
4) A window will appear for choosing the destination location, click "Next >"
5) Follow the instructions until the window with the "Finish" button appears.
6) Click "Finish" when the WebVT installation is complete.
Note: To order an annual update software license, please see your dealer for availability and
pricing.
3.2. USB I
NTERNET
Before updating, ensure that the battery is fully charged.
1) Connect the USB cable from the TPMS TOOL to the PC, and turn the device on.
2) Start WebVT software.
3) A screen will appear indicating "Update Device".
4) Press "Yes" to update to the latest software version. The update will take several minutes to
complete and the status bar will indicate the percentage of update completed.
Turn off the screen saver function on your PC and do not disconnect the
TPMS TOOL from the PC or turn off your computer during the update process.
Doing so could result in serious damage to the tool.
UM-365OEA-U
VT PC S
EB UITE
O U
PTION PDATING
OE46 TPMS TOOL User Guide
Fig. 6
Warning!
User manual OE46 Page 29/34