Monitor Installation - golmar Rock Serie Manuel D'installation

50
F
ix the monitor connection block to the wall.
Avoid placing the monitor near sources of heat,
in dusty locations or smoky environments.
To install the monitor directly over the wall,
drill two holes of Ø6mm. and use the
supplied screws.
The upper part of the monitor connection block must
be placed at 1.60m height. The minimum distance
between the monitor connection block and the closest
object must be 5cm.
F
ix the monitor.

MONITOR INSTALLATION

Place the monitor at right angles to the
connection block and align the attaching
holes of the monitor with the attachment
hooks of the connection block, as it is shown
on the drawing.
Lock out the monitor. Press the right
side till the attachment clip locks
the monitor firmly.
To disassemble the monitor from the
connector, use a flat screwdriver to
release the attachment clip. Remove
the monitor from the connection block,
taking special care that it does not fall.