Function Push Buttons - golmar Rock Serie Manuel D'installation

52
DESCRIPTION OF THE PLATEA TELEPHONE
D
escription of the T-730/R5 telephone.
Avoid placing the telephone near sources of heat, in dusty locations
or smoky environments. The telephone can be fixed using an
electrical embedding box or directly on the wall, as shown on the
picture. If the telephone will be installed directly over the wall, drill
two holes of Ø6mm on the specified positions, using 6mm wall
plugs and Ø3.5 x 25mm screws.
F
unction push button.
With the handset lifted, a call can be made to the master porter's exchange (this
function is only available in installations with general door panels). During call
reception and communication processes, it allows lock release activation.
b
d
a
c
e
f
g
e
Pass the installation wires through the corresponding hole and connect
them as shown on the installation diagrams. Close the telephone as shown
on the picture. Once the telephone is closed, connect the handset using the
telephone cord and put it on the cradle.
a. Telephone handset.
b. Speaker grille.
c. Microphone hole.
d. Subjection hole.
e. Telephone cord connectors.
f.
Function push button.
g. Hook switch.
It is necessary to open the telephone for wiring
and fixing purposes. To open the telephone,
insert a flat screwdriver into the slots and
gently lever as shown in the drawing.