Door Panel - golmar Rock Serie Manuel D'installation

44
E
mbedding box positioning.
1650
If necessary, make a hole in the wall so that the upper part of the door panel is positioned at a
height of 1,65m.
The dimensions of the hole are: 131(W) x 131(H) x 45(D) mm.
The door panel has been designed to endure diverse environmental conditions. However it's
recommended to take additional cautions to ensure a long life for it ( rain shields, covered places...).
To obtain a good quality picture on video door entry systems, avoid direct incidence from light
sources (sun, streetlights,...).
P
lacement the embedding box.
DOOR PANEL INSTALLATION
Break the flange to allow the entry of the cables.
Pass the wiring through the hole made in
the bottom part of the embedding box.
Level and flush the embedding box.
Once the embedding box is placed,
remove the protective labels from the
attaching door panel holes.
1850
1450