Care And Transport; Transport; Storage; Cleaning And Drying - Agatec RL110 Manuel D'utilisation

Care and Transport

Transport

Transport in the field
When transporting the equipment in the field, always make sure that you
• either carry the product in its original transport container,
• or carry the tripod with its legs splayed across your shoulder, keeping
the attached product upright.
Transport in a road vehicle
Never carry the product loose in a road vehicle, as it can be affected by
shock and vibration. Always carry the product in its transport container
and secure it.
Shipping
When transporting the product by rail, air or sea, always use the
complete original Agatec packaging, transport container and cardboard
box, or its equivalent, to protect against shock and vibration.
Shipping, transport of batteries
When transporting or shipping batteries, the person in charge of the
product must ensure that the applicable national and international rules
and regulations are observed. Before transportation or shipping, contact
your local passenger or freight transport company.
Field Adjustment
After transport inspect the field adjustment parameters given in this user
manual before using the product.

Storage

Product
Respect the temperature limits when storing the equipment, particularly in
summer if the equipment is inside a vehicle. Refer to "Technical Data" for
information about temperature limits.
Field Adjustment
After long periods of storage inspect the field adjustment parameters
given in this user manual before using the product.
Alkaline Batteries
If the equipment is to be stored for a long time, remove the alkaline
batteries from the product in order to avoid the danger of leakage.
14

Cleaning and Drying

Product and Accessories
• Blow dust off optical parts.
• Never touch the glass with your fingers.
• Use only a clean, soft, lint-free cloth for cleaning. If necessary, moisten
the cloth with water or pure alcohol.
• Do not use other liquids; these may attack the polymer components.
Damp Products
• Dry the product, the transport container, the foam inserts and the
accessories at a temperature not greater than 40°C / 104°F and clean
them.
• Do not repack until everything is completely dry.
Damp Products
• Dry the product, the transport container, the foam inserts and the
accessories at a temperature not greater than 40°C / 104°F and clean
them.
• Do not repack until everything is completely dry.

Safety Directions

General

Description
The following directions should enable the person responsible for the
product, and the person who actually uses the equipment, to anticipate
and avoid operational hazards.
The person responsible for the product must ensure that all users
understand these directions and adhere to them.

Intended Use

Permitted Use
• The instrument casts a horizontal laser plane for the purposes of
alignment.
• The unit can be set up on its own base plate, wall- mount or on a
tripod.
• The laser beam can be detected by means of a laser detector.
• This product is intended for indoor use and applica- tions.
EN
15