Safety Signs; Obvious Danger Points On The Linear Unit - RK Rose+Krieger S Clean Notice D'assemblage

5. Safety 5. Safety 5. Safety

5.3 Safety signs

The warning and mandatory signs are safety signs that warn of risk or danger.
Information in these assembly instructions on particular hazards or situations on the linear unit
must be observed, as failure to do so increases the risk of accidents.
The "General mandatory sign" instructs you to be alert.
Marked information in these assembly instructions requires your particular attention.
They contain important information about functions, settings and procedures. Failure
to observe may lead to personal injury and faults on this controller or damage to the
environment.
The "Hot surface" warning sign warns against injuries from hot surfaces.
The "Danger of drawing in" warning sign warns of points on this product where you
could be drawn into the machinery.
The warning sign "Danger! Hand injuries" warns that hands may be crushed, drawn
in or injured in some other way.
The warning sign "Danger! Risk of cutting" warns against injury to the hands.

5.3.1 Obvious danger points on the linear unit

46 46 46