Instructions To The Owner - Hedson IRT UV SMARTCURE Manuel D'instructions

5. Instructions to the owner

The owner of the curing device must produce clear
operating instructions, adapted to local site conditions,
and make these available to all users.
Only original spare parts shall be used to maintain the
products high safety.
Dispose of spent items at the nearest environmental
protection facility for recycling.
The UV radiation emission is:
according to EN62471 = Risk Group 3 (RG-3)
6. Markings
Top label 365 nm
Part no. 715097
365
Red RAL 3002
Blue RAL 5017
Yellow RAL 1023
Black RAL 9017
White RAL 9016
RISK GROUP 3
WARNING. UV emitted from this lamp.
Skin and eye injury could result. Avoid eye
Transparent
and skin exposure to unshielded lamp.
(EN62471 and ANSI/IESNA RP-27.3-07)
715090_R6
Label part no. 715118
IRT UV SMARTCURE OVERLAY 395
OVERLAY 2019-11-20
Product identity label
365 nm
6 6
Top label 395 nm
Part no. 715090
395
RISK GROUP 3
WARNING. UV emitted from this lamp.
Skin and eye injury could result. Avoid eye
and skin exposure to unshielded lamp.
(EN62471 and ANSI/IESNA RP-27.3-07)
Product identity label
395 nm
EN
7. Maintenance
7.1 Storage
Store the IRT UV SmartCure indoors with an ambient
temperature of -40°C - +70°C. See other temperature
conditions in table in chapter 2.
7.2 Battery
Remove the battery (no. 3 in chapter 3.1) from the curing
device and charger when not in use to ensure a longer
life time.
Battery Change
Battery is changed as shown in picture.
1
2
715098 rev 3