Product Description - Hedson IRT UV SMARTCURE Manuel D'instructions

3. Product description

The IRT UV SmartCure is a hand-held appliance, battery-
operated and equipped with high power LED module
emitting UV and visible light. IRT UV SmartCure is
available in wavelengths 365 and 395 nm, refering to the
peak value.
Use products/UV paint systems developed for UV curing.
Check with your paint supplier which wavelength to use.
3.1 Overview
7
1
4
1. Trigger switch
2. Display
3. Lithium-ion battery
4. Release push-button for battery
5. Dust filter
6. Cover dust filter
7. Top label - shows if it is 365 or 395 nm
715098 rev 3
3.2
2
5, 6
3
4. Operation
Before every usage, check that:
• Glass is clean and free from over spray, which
• Fan is running during operation.
• UV LED light up.
Hold IRT UV SmartCure approx. 100 mm/4 inches from
object to be cured. Time depends on area and material
to be cured, see paint manufacturers data sheet.
For larger areas, use sweeping motion similar when
using a spray gun.
EN
Display
Rev. Change no
decreases the intensity.
Battery level
Change description
Curing time in minutes
and seconds.
Change battery,
symbol is flashing when
0%.
Fan is running,
symbol is flashing.
High temperature,
symbol is flashing.
Service symbol with code,
symbol is flashing.
Rev. by Appr. by Appr. dat
E
5 5