Noise Information; Vibration Information - Worx WX801 Notice Originale

**Voltage measured without workload. Initial battery voltage reaches
maximum of 20 volts. Nominal voltage is 18 volts.

NOISE INFORMATION

A weighted sound pressure
A weighted sound power
Wear ear protection.

VIBRATION INFORMATION

Vibration total values (triax vector sum) determined according to EN 60745:
EN
surface grinding or abrasive
cutting off
14
The declared vibration total value may be used for comparing one tool with
another, and may also be used in a preliminary assessment of exposure.
WARNING: The vibration emission value during actual use of the power tool
can differ from the declared value depending on the ways in which the tool is
used dependant on the following examples and other variations on how the tool is
used:
How the tool is used and the materials being cut.
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring it is sharp and in good
condition.
The tightness of the grip on the handles and if any anti vibration accessories are
used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not
adequately managed.
WARNING: To be accurate, an estimation of exposure level in the actual
conditions of use should also take account of all parts of the operating cycle
such as the times when the tool is switched off and when it is running idle but not
actually doing the job. This may significantly reduce the exposure level over the
total working period.
Help to minimize your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades.
Vibration emission value a
Uncertainty K = 1.5m/s²
L = 80.9dB(A)
pA
K = 3 dB(A)
pA
L =91.9dB(A)
wA
K =3 dB(A)
wA
= 3.693 m/s
2
h,AG