Table Des Matières; Owner Responsibility; Introduction; Product Description - Husqvarna K 7000 Manuel D'utilisation

Introduction..................................................................... 2
Safety..............................................................................5
Assembly...................................................................... 13
Operation...................................................................... 18

Owner responsibility

WARNING:
stone by methods such as cutting, grinding
or drilling, especially during dry operation,
generates dust that comes from the material
being processed, which frequently contains
silica. Silica is a basic component of sand,
quartz, brick clay, granite and numerous
other minerals and rocks. Exposure to
excessive amount of such dust can cause:
Respiratory disease (affecting your ability to
breathe), including chronic bronchitis,
silicosis and pulmonary fibrosis from
exposure to silica. These diseases may be
fatal;
Skin irritation and rash.
Cancer according to NTP* and IARC* */
National Toxicology Program, International
Agency for Research on Cancer.
Take precautionary steps:
Avoid inhalation of and skin contact with
dust, mist and fumes.
Wear and ensure that all bystanders wear
appropriate respiratory protection such as
dust masks designed to filter out
microscopic particles. (See OSHA 29 CFR
Part 1926.1153)
2
Contents

Introduction

Processing of concrete and
Maintenance................................................................. 26
Transportation, storage and disposal........................... 28
Technical data.............................................................. 29
Declaration of Conformity............................................. 30
To minimize dust emissions, use water to
bind the dust, when feasible.
It is the owner's/employer's responsibility that the
operator has sufficient knowledge about how to use the
product safely. Supervisors and operators must have
read and understood the Operator's Manual. They must
be aware of:
• The product's safety instructions.
• The product's range of applications and limitations.
• How the product is to be used and maintained.

Product description

These HUSQVARNA K 7000 and K 7000 SmartGuard
are electric portable handheld cut-off machines. To
operate the product, connect the product to the
necessary power pack.

Intended use

The product is used to cut hard materials as concrete,
masonry, stone and steel. Do not use the product for
other tasks. The product must only be used by
professional operators with experience.
Work is constantly in progress to increase your safety
and efficiency during operation. Speak to your servicing
dealer for more information.
Note:
National/Local regulations could restrict the use
of this product.
1635 - 003 - 20.08.2021